FAQs
When charging the charging case, the indicator is off.
•
Please ensure the charging case is correctly connected with power source.
No sound
•
Check if the earbuds are operating.
•
Check if the earbuds volume are at an appropriate level.
•
Check if the earbuds are correctly connected with mobile phone.
•
Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
•
Check if mobile phone is in an area with strong signal.
•
Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds and
mobile phone.
When playing music, cannot control pause/play/next track via the earbuds.
•
Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile.
The tapping function is too sensitive or not sensitive.
•
Please ensure you are tapping within the effective area with a moderate intensity or at an appropriate angle.
You can also adjust to a desired tapping sensitivity via the EDIFIER CONNECT APP.
After one earbud alone is connected to another mobile phone, there is no sound from the other earbud
when used again.
•
When one earbud alone is connected to another mobile phone, the interconnection between the left and
right earbuds may have been disconnected. To restore the two earbuds mode, double click the pairing
button on the case to resume interconnection between the left and right earbuds. Then try again.
Wearing detection function is not sensitive or too sensitive.
•
To ensure every wearing of the earbuds by user can be recognized, the recognition of wearing detection
have been slightly raised. If not used, please place the earbuds back into the case for charging and storage;
it is better not to place the earbuds alone in the pocket or on the desk for long periods of time, so as to avoid
interference with the wearing detection function or missing of the earbuds. You can also set the automatic
in-ear detection function to other functions or close it via the EDIFIER CONNECT APP.
