EDIC-mini Tiny A22 series, Краткое руководство по эксплуатации, Страница: 3 / 8

3
Turning the Recorder on
After you set the power switch (7) into “ON”
position, press the button (2). Keep it pressed
for 2-3 seconds and then release. The recorder
will start self testing. While self testing, the
recorder LED will flash three times and after a
pause the fourth time. The duration of the fourth
flash can last for some seconds depending on the
recorder‘s memory capacity. Charge the recorder’s
rechargeable battery before the usage.
Start/Stop Recording
To start/stop recording, keep the button pressed
for 2 seconds while the LED does not signal.
When the recorder starts/stops recording, the LED
flashes five times.
While recording, the sequences of LED flashes
show the charge of the battery (the first sequence:
1 flash – from 5% to 100% , 2 flashes – from 1% to
5 %, and 3 flashes mean that the battery is almost
discharged (it should be changed) and the second
sequence shows the free memory capacity: 1 flash
– 75%-100%, 2 flashes – from 50% to 75%, 3
flashes – from 25% to 50%, and 4 flashes – from
1% to 25%).