7
Recording
Option 1
.
Press the K
2
button
and t
he
Recorder switches to Record Mode and
the
indicator will display “Rec” and red LED will
start flashing. To stop recording press K2 again.
Option 2.
Shift the switch Rec-Stop
to "Rec" position (round mark on the case).
The recording will start. To stop recording
shift the switch to "Stop" position.
In the
modes 8-ch RAW, Stereo, High S/N the
indicator is flashing for 2-3 seconds. VAS is
not
provided, circular recording and
timers are set
within the current profile.
See
full operation manual.
Playing back with Headphones
Connect headphones to the corresponding
connector on the Recorder’s case. Press K3,
then K1. The indicator reads a list of records with
Blinking LED indicates that charging is in process.
Battery charge level is shown at the right upper
corner of the display. Battery charging time - 3-5
hours.
Attention!
Even if you do not use the Recorder
regularly, it is required to charge the battery at
least once a month. Otherwise, the Recorder may
fail - this is not the warranty case.
