EDIC-mini EM Tiny Plus Series, Руководство по эксплуатации

Страница: 7 / 17

2 20 - 80% 50 - 75%
3 2 - 20% 25 - 50%
4 1 - 25%
The interval between the first and second series of flashes is approximately 4 seconds,
and between the second and first is about 8 seconds. Note that in battery recorders the
first series of flashes shows battery charge at the time the recorder has been activated
and is not controlled during recording.
To stop recording, shift the Switch to «Off» position. The LED flashes once for 10-12
seconds and the recorder stops recording.
Attention:
•
Avoid using the recorder with nearly discharged battery, Otherwise it may turn
off at the wrong moment.
• The higher the record's sampling rate, the more energy is consumed by the
recorder. At the frequency of 22 kHz the consumption is almost twice higher
than at 8 kHz, and for the recorders with batteries the autonomy is down by
more than three times.
• Fast switching during recording
(On → Off → On) puts the tab which is visible in the Sound Processor
program. Thus it is possible to mark the desired parts of records and then
quickly find them.
• Fast switching when the recorder is off
(Off → On → Off) shows battery charge level and free memory capacity
through flashing of LED. For this indication, see «Start and Stop Recording»
9. Playing Back and Uploading to the PC
Use EMPlus program to play back and upload records onto the PC as well as to configure
your recorder. SoundProcessor program is designed to process the transferred
records.