Connect a DC voltage source (3.6-6V) to connectors 1 (golden wire - minus) and 2 (red wire - plus) of the cable from the
delivery set. If the voltage source is a Li-Pol battery, then by connecting the contacts 2 and 3 (green wire) of the cable you
can provide current of 100 mA (by connecting an adapter to the voice Recorder and connecting the adapter to the
computer's USB)
2. Preparing microSD Card
MicroSD card which is in the delivery set, doesn't require any preliminary preparation. It is formatted in FAT32 and there
is also a configuration file CONFIG.INI containing Recorder's settings and EVENTS.TXT file with detailed instruction to
operate the Recorder.
If you need to use a new memory card, first make sure that the file system installed on the card is FAT32, then simply
insert the new microSD into the Recorder and shift the Switch once Off-On-Off.
When replacing the card, it is strongly recommended to format new microSD in the FAT32 file system.
3. Recording.
To start recording, set the Switch to ON position. Red LED flashes 5 times, and the Recorder starts recording. During
recording, red LED is flashing by two series of flashes, the number of flashes indicating:
Number of flashes
Battery charge level
(1st series)
Free memory capacity
(2nd series)
1
70-100%
75-100%
2
30-60%
50-75%
3
2-30%
25-50%
4
1-25%
To stop recording, shift the Switch to OFF position. Red LED flashes and recording stops.
A series of flashes when enabling recording that are different from the above mentioned state for one of the following
contingency situations: 3 flashes - battery is discharged, 10 flashes indicate microSD failure (full, can not be read or not
available).
4. Record Playback
Make sure the Switch is in “Off” position (Removing the microSD from Recorder during recording may lead to audio file
damage). By gently pressing on microSD card, remove it from the Recorder. Insert microSD card into the supplied USB
reader, then connect it to the USB port of the PC. MicroSD card should be recognized as a separate disk with recorded
WAV files of audio recording, which can be played back by any media player.
5. Reset.
In case of a contingency situation with the Recorder, use any pointed object (toothpick etc) to press the Reset button (the
hole on the case, marked R / Res / Reset). In case the card is installed, red LED will be on. If there is no card installed,
there will be 10 flashes to indicate its absence. For the recorders with external power source, in case of any malfunction,
disconnect and then connect power source again.
In Box:
1. Recorder
2. USB Reader to operate microSD card
3. MicroSD card
4. USB cable for charging
5. Short operating instruction with Warranty Certificate
6. Package box
Warranty
The manufacturer undertakes warranty repair liabilities for 1 year from the date of purchase, but no longer than 2 years
from the date of manufacture of the product (warranty does not cover batteries), other rules are regulated by the Law "On
Protection of Consumers' Rights".
Further there is usually a long list of cases when the user loses warranty. We have a different approach. We make use of
every warranty case as an opportunity to find out the causes and make our products better. Therefore, we are always
grateful for any comments and proposals regarding our products, as well as the detailed description of the conditions and
causes that led to failure. We appreciate time and skills of our customers, and if the problem is not that complicated, we
