“
EFFICIENCY
”
(bottom line). The top line is preset and reset through the supplied IR
remote. The
“
ACTUAL
”
line can be configured using a supplied photo-eye and reflective
plate or an
optional
momentary contact closure.
To configure the display using the IR remote follow these instructions. The
“SET” button will be used to edit both lines. Keep pressing “SET” to rotate
through the edit mode.
Preset GOAL Line
Enter the
EDIT
mode
1.
To edit the top line, point the IR remote toward the center of the display. Press
the
“
SET
”
button until the LED dot in the lower right corner of the least
significant digit flashes.
2.
Enter the number
you want displayed. Press “
SET
”.
Preset ACTUAL Line
The
“
ACTUAL
”
line will increment by
“
1
”
every time the photo-eye is activated. A number
can be preset into the
“
ACTUAL
”
line using the IR remote.
Enter the
EDIT
mode
1.
To edit the bottom line, point the IR remote toward the center of the display.
Press the
“SET”
button until the LED dot in the lower right corner of the least
significant digit flashes.
2.
Enter the desired preset numbers
3.
Press the
“
SET
”
button to save
