EdgeMarc 250AE Hardware Installation Guide
6
© 2014 Edgewater Networks. All Rights Reserved.
EdgeMarc 250AE Back Panel
Figure 1-2
shows the back view of the EdgeMarc 250AE.
Figure 1-2
EdgeMarc 250AE Back Panel Components
Table 1-2
defines the EdgeMarc 250AE back panel components.
Table 1-2 EdgeMarc 250AE Back Panel Components
#
Label
Function Description
1
Phone
FXS ports (4) 10/100/1000 Mbps RJ-45 Ethernet FXS ports for
connecting IP phones. Default IP: 192.168.1.1
2
DSL/Line
FXO port
Connects the EdgeMarc to a phone line supporting
ADSL/ADSL 2/2+ standards. The FXO feature can be used
to make calls to the PSTN.
Note:
Your connection to the PSTN can be tested by
attaching a phone to FXS port 4 and disconnecting the
EdgeMarc from the power source.
3
Ethernet WAN xDSL port Connects the EdgeMarc to a cable or xDSL modem.
4
Ethernet LAN
LAN ports (8) 10/100/1000 Mbps RJ-45 Ethernet ports for LAN
network connectivity. Default IP: 192.168.1.1.
Note:
The EdgeMarc can also be configured through any of
these ports using the web interface.
5
USB
USB port
(1) USB port.
6
Erase
Erase
button
Press the Erase button in quick succession to control the
following:
•
One click—No action.
•
Two clicks—Resets the CLI and GUI password with no
service interruption.
•
Three clicks—Restores to factory default settings and
reboots the system.
Note:
When restored to factory default settings, the
current configuration is lost, disconnecting all VoIP devices,
Internet connectivity, and network access for computers
until the system is reconfigured.
7
Power
Input
Power
Socket
Connects the EdgeMarc to an AC power outlet.
