manualshive.com logo in svg

Edgewater Networks 4610W, Руководство по установке оборудования, Страница: 13 / 21

Поделиться
Скачать
Edgewater Networks 4610W Скачать руководство пользователя страница 13

EdgeMarc 4610W Network Services Gateway Installation Guide 

 

10 

To reduce the risk of fire, use only 26 AWG or larger wire (e.g. 24, 22, 20, etc.) to 
connect the T1 port on your unit to an RJ-45 jack.  

•

  Ethernet cables to connect the LAN ports to LAN switches or to individual IP phones. They 

can also be used to connect the Ethernet WAN port to a WAN router, a Cable Modem or a 
DSL Modem, if T1/E1 port is not being used to connect to the WAN. 

Desktop Installation  

1.  Remove the 4610W and accessories from the shipping container.  

2.  Place the 4610W on a flat, dry surface such as a desktop, shelf or tray.  

Rack-Mount Installation 

You can mount the 4610W in a 19” rack by using the rack-mount kit supplied with the product. 

1.  Attach the ear mounts to both sides of 4610W with the screws.  

2.  Attach the 4610W with the ear mounts to the shelf by screwing the ear mounts to the shelf 

with screws. 

Connecting the Power and Cables 

The 4610W comes with an AC power cord and power adapter for connecting the unit to the AC 
outlet. 

Warning 

Always connect the AC power cord to an AC outlet suitable for the power supply that came with 
the unit in order to reduce the risk of damage to it. 

•

  Connect one end of the AC power cord to the power adapter and the other one to the AC 

outlet. 

•

  Connect plug from the power adapter to the Power Connector on the 4610W. Sometimes a 

little force is necessary to get the plug properly positioned 

Caution 

Secure the power adapter using a fastener or tie wrap to nearby shelf so that it does not hang 
from the power connector.  

•

  If connecting to the WAN using the T1 then connect the T1 cable to the T1/E1 port and the 

other end of the cable to the T1 line. Enable the T1 port from the Network Configuration 
Menu. In this case Ethernet WAN port will not be available. 

•

  If connecting to a WAN router, cable modem or DSL modem, then connect the Ethernet 

cable to the Ethernet WAN port on 4610W and the other end to the WAN device. 

Содержание 4610W






















Отзывы:

Нет отзывов