Before You Start
Please read this guide thoroughly as it describes the basic installation of
the device. Refer to online help for assistance when deploying and
configuring the device in a specific environment.
This guide also provides an example of a typical 200EW/E deployment
that can be used as a guideline for your installation.
Requirements for Installation
•
A computer with a web browser such as Microsoft Internet Explorer or
Netscape Navigator or any other browser of your choice
•
At least one Ethernet cable
•
Following information supplied by the VoIP Service Provider:
o
IP address of the WAN interface if DHCP is not being used.
o
IP address of the Softswitch
Note:
The 200EW/E has wireless capability, whereas the 200E
does not.
Page 1 of 7
