Edgewater Networks 155CC, Руководство пользователя

Страница: 41 / 53

10 10
10 10
10
Routine Maintenance
EdgeWater 175CC / 155CC 41 41 41 41 41
10.1 Exterior Hull and Deck 10.1 Exterior Hull and Deck
10.1 Exterior Hull and Deck 10.1 Exterior Hull and Deck 10.1 Exterior Hull and Deck
Fiberglass
When you remove the boat from the water, clean it as soon as possible. Dirt, debris and grime will come
off easier while it is still wet. Use a brush and biodegradable boat cleanser. Stubborn areas may be
cleaned with a non-abrasive cleaner. Harsh abrasives and chemical cleaners are not recommended as
they can damage the gelcoat, shorten its life, and make it more susceptible to stains. When used in
saltwater, the boat should be washed after each use.
The hull should be waxed periodically, at least once a year, with a high quality wax. This will keep it shiny
looking and help prevent chalking and aging. The wax will also make it easier to keep clean by closing
the pores that trap the grime.
If the boat will be kept in freshwater or saltwater for an extended period, a proper barrier
coat and bottom paint must be applied.
Do not wax non-skid areas. It could make them slippery and increase the possibility of
injury.
Stainless Steel Hardware
The stainless steel hardware of your boat should be cleaned and washed after each boat use, especially
in salt or polluted water. While it is “stainless” it is not “stain-proof”. If it is not cleaned, it can develop
surface rust stains. It can be protected with a high quality automotive or boat wax. It can also be
protected with a commercial metal cleaner and protectant.
Anodized Aluminum
The aluminum can be maintained with a regular washing with soap and water. Otherwise it can develop
a surface corrosion, which can penetrate the anodizing and attack the aluminum underneath. If badly
scratched, it can be repaired with an aluminum or silver paint.
Chrome Hardware
Use a good metal polish and protect with wax. This should be done every couple of months or as soon as
you notice any finish deterioration.
Plexiglas
Do not use products with ammonia on your Plexiglas windscreen. It can mar the surface and reduce its
transparency. A mild soap and water or non-ammonia cleaner will work well. In addition to ammonia,
cleaners should not be used which contain solvents, acetone, or alcohol.
https://www.boat-manuals.com/edgewater/