3-9
701 Digital Link
0004809_REV_F
3.3
Activating the 701-DL
To activate the 701-DL Digital Link System:
1.
Turn on the computer and launch the Discover application.
2.
Turn on the line power switch on the back panel of the 701-DL Digital Link. This switch can be left
in the on position at all times if desired.
3.
Turn on the power switch on the front panel.
4.
The fish power indicator should illuminate; the LAN indicator should flash continuously, and the
LINK indicator should flash while a reliable communications link with the towfish is being
established and then illuminate continuously when the link is found. Also, the NET Radio Indicator
Tab in the lower control panel of the Discover application UI should display:
3.4
Post Recovery
After recovering a tow vehicle from a survey, power down the topside computer and 701-DL. The unit can
then be safely disconnected from the tow vehicle. If the next survey is not for an extended time period,
EdgeTech recommends storing the unit in its original shipping container in a safe and dry environment
