5
OPERATION
Installation Check List before Operation
1. Have all packing materials and tape been removed from the
interior and exterior of the wine cooler?
2. Have the installation instructions been followed, including
connecting the machine to electricity? And has proper grounding
been installed for the wine cooler?
3. Has the machine been leveled?
4. Is the wine cooler in a site where the ambient temperature is
around 77º F all year round?
5. Is there a clearance of at least 10” at the rear, 5” at the top and
5” at the sides for proper air circulation?
Adjusting the Temperature
Front panel controls
This wine cooler features a touch sensitive control panel. You may
adjust the temperature of the wine cooler using the front panel
controls. The temperature displayed will be in Fahrenheit. The wine
cooler has a temperature range from 54°F to 66°F for the top zone,
and a temperature range from 46°F to 66°F for the lower zone.
Whether your wine cooler can reach the actual set temperature
depends on the ambient environmental conditions.
Adjusting the top zone temperature:
Press the and buttons on the left side of the control panel to
raise and lower the temperature, respectively. The set temperature
will flash for a few seconds, and then revert to the ambient inner
temperature of the wine cooler.
Adjusting the lower zone temperature:
Press the and button on the right side of the control panel to
increase and lower the temperature, respectively. The set
temperature will flash for a few seconds, and then revert to the
ambient inner temperature of the wine cooler.
Press the
button to turn on and off the inner light.
Notes: Allow at least 24
hours before storing your
wines and to allow the
temperature to acclimate.
Radio devices may interfere
with the touch sensitive
controls and cause the
temperature settings to
change. Move radio devices
away from the wine cooler.
Up
Up
Down
Down
Top
Light
Bottom
LCD Display
Light Button
Temperature Adjustment Buttons