5. Do a test-pour to ensure that the beer is flowing freely. If the test pour is good,
start the party!
Note that you may experience a lot of foam shortly after tapping the mini keg.
If you wait 15-20 minutes after tapping, the foam should lessen. Additionally,
pours with the spout fully open should deliver less foam than pours with the
spout only partially open.
To put the mini keg into the mini kegerator:
1. Open the mini kegerator door by depressing the button located on the upper
right-hand side of the door.
2. Gently put the mini keg on the cold plate. You may find it helpful to hook the
line(s) up to the mini keg while it is slightly outside the unit.
Heineken brand DraughtKeg tapping instructions
Heineken brand DraughtKeg mini kegs have an internal CO
2
tank. This is the only
type of mini keg that you can tap without the optional accessories.
1. Chill the mini keg
2. Open the door of the mini kegerator.
3. Place the mini keg near the open door.
4. Make sure the top of the mini keg looks like this:
5. Attach the Heineken-style tap to the beer line:
6. Attach the Heineken-style tap and beer line assembly to the mini keg:
4
