15
Control Panel
(rear of unit)
Descriptions of LEDs and buttons:
1. Ice Full (Red) LED: Ice Full indicator light.
When this LED is lit, the ice storage bin is full of ice or there is something
obstructing the ice-full probe. The unit will stop working. When ice
cubes are taken out of the ice storage bin, clearing the ice-full probe,
the red LED will keep flashing for 3 minutes.
Then the unit will restart and return to the ice making mode.
2. Ice Making (Green) LED: Ice Making indicator light.
When this LED is lit, the unit is working in the Ice Making mode
controlled by a temperature probe on the evaporator. When the
green LED is flashing, the unit is working in the Ice Making mode
controlled by a fixed timer.
3. Ice Harvest (Yellow) LED: Ice Harvest indicator light.
When this LED is lit, the unit is working in the Ice Harvest mode
controlled by the ice-full probe. When the green and yellow LEDs are
lit, the unit is working in the cold preservation stage.
4. Mode button: Mainly for service. When this button is pressed, unit
can change from Ice Making mode to Ice Harvest mode, or from Ice
Harvest mode to Ice Making mode. You can judge the mode from the
status of the green and yellow LEDs.
5. Clean Button: When this button is pressed, the unit enters the
Cleaning mode. The green and yellow LED’s flash at the same time.
To stop the Cleaning mode press the button again.
IMPORTANT:
• It is not recommended that the ice size be adjusted unnecessarily
since this could damage the machine’s controls.
• Do not let water contact the control box.
Major Functions
1. Completely automatic operation.
2. When the ice storage bin is full, the machine stops making ice
automatically. It will start to make ice again once the cubes are
removed.
3. The different colors of the LED display indicate various operating
modes.
4. A sensitive probe and accurate timer enhance the performance of
the ice maker.
5. Built-in compressor protection system.
Red
Light
Green
Light
Yellow
Light