5
MODE
The unit will automatically be set to the low setting when powered on. To
turn the setting to high press the “mode” button once and the high
indicator light will illuminate. To turn back to low setting press the “mode”
button again and the low indicator light will illuminate.
OSCILLATION
When the heater is in operation press the “Osc” to turn on the oscillation
feature. The body of the unit will swing left and right automatically, at the
same time the oscillation indicator light will illuminate. Press the “Osc”
once more to turn oscillation off.
SET
The “set” button allows you to set the temperature and/or time.
To set the timer press the “set” button once. The LED display will show “0
H”, press the “+” or “-“ until you have reach the desired time you want the
unit to shut off. The timer range is from 1-12 hours and is in increments of 1
hour.
To set the temperature press the “set” button again. The LED display
panel will reflect 77°F and you can now adjust the temperature using the
“+” or “-“ until you reach desired temperature. The temperature range is
from 59°F to 99°F. The temperature will increase/decrease in 1°F and
reflect your set temperature. After 5 seconds the LED display panel will
reflect the current room temperature.
When the room temperature is below 14°F the LED display panel will show
as “LO”, and when the temperature is above 99°F the display panel will
show as “HI”. When the temperature is between 14°F to 99°F the LED
display panel will show the actual room temperature.
Note:
If you do not wish to set the timer but only change the temperature press
the “set” button twice to bypass the set timer function.
Tip Over Switch
This heater is fitted with a safety tip-over switch to ensure it can only be
operated in the correct upright position. When the unit tilts more than 45°
you will hear a click and the heater will cut off automatically.
