3
Important: Do not remove any safety, warning, or product information labels from your
beverage cooler.
Warning: You may need to use two or more people to move and install the beverage cooler.
Failure to do so can result in back or other injury. Carefully remove the packaging materials.
Remove any shipping tape and glue from your beverage cooler before using. Do not use
sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or
glue. These products can damage the surface of your beverage cooler.
Installing the Beverage cooler
The beverage cooler should be installed in accordance with local electrical code requirements.
The beverage cooler should also be placed in a location that is strong enough to support its
total weight, keeping in mind that it will weigh substantially more when fully loaded than when
empty.
Before you plug the beverage cooler into a power supply, be sure to let it stand
upright for at least 24 hours to allow the compressor’s oils to settle.
Unpacking the Beverage Cooler
Types of Installation
This beverage cooler has been designed for free-standing installation only. There must be
adequate ventilation space around the top, back, and sides of the unit.
Free-standing Installation:
A free-standing installation will allow you to install the beverage cooler in almost any place
you desire. You must follow the stated instructions for electrical requirements, installation
clearance, and leveling the beverage cooler.
Tip: Gather the model
and serial number
from the product label
and write them down
before installing the
wine refrigerator.
Warning: DO NOT install the beverage cooler built-in or behind a closed cabinet door.
