16
Step 3
Attach one end of the drain hose to the drain port with the pipe hoop provided.
Step 4
Insert the rubber plug into the other end of the drain hose, secure it with the pipe hoop and
attach it to the drain pipe clip.
Manual Drainage
When the internal tank is full the LED window will display the error code “H8”. When this occurs,
the tank must be drained manually into a drain pan.
To drain the tank manually:
1. Remove the drain pipe from the pipe clip on the back of unit.
2. Route the drain pipe to a drain pan or other suitable drain.
3. Remove the pipe hoop and rubber stopper from the end of the drain pipe.
4. Allow the water to drain fully.
5. Reinstall the rubber stopper and pipe hoop.
6. Reinsert the drain pipe into the pipe clip.
Note: Although not recommended, you may choose to connect a permanent drain hose (not
included) to the drain port provided that a suitable drainage option (floor drain or sink, etc.) is
available. Please note that this unit has no drain pump; all water will drain with gravity only, i.e.,
only “downhill.”
