Edge XTREME EDX1800.2FD-EO, Руководство пользователя

Страница: 5 / 28

5
Power Cable
Ground Cable
RCA Cables
• At least 4 gauge cable should be used for the ground connection to the amplifier.
• The amplifier ground should be connected directly to the chassis of the vehicle, to
bare metal.
• The cable length should be kept to an absolute minimum.
• It is not recommended that you connect the ground cable to the vehicles seatbelts
anchor point.
• At least 4 gauge cable should be used for the power connection to the amplifier.
• The power cable should be taken directly from the battery. Rubber grommets should be
used when passing through any bulkheads to prevent the cable from becoming chaffed
or cut.
• It is vital that a fuse / circuit breaker (of at least equal value to the one fitted in the
amplifier) is placed inline with the power cable and is no further than 18 inches away
from the battery.
• Please ensure that the fuse is not fitted until the entire installation procedure is complete.
• Depending on the model number of your amplifier and the number of speakers you
wish to power you will have to run either one or two or RCA cables from the source to
the amplifier.
• Please take extra care when running these cables from the source to the amplifier.
Ensure that they are placed away from all items that can generate any interference,
wiring harnesses etc.
• It is recommended that the RCA cables should be run on opposite sides of the car
to the previously installed power cables if possible, to avoid the cable picking up
interference.