Ford 4.6 and 5.4 Liter
Evolution
8
WARNING Do not combine, or “stack” chips (modules) to gain more horsepower.
The chips could be incompatible and result in powertrain failure or create dangerous
conditions (such as adverse running conditions, high idle, DTC codes, etc.) leading to a
serious or fatal accident.
PIDs (Parameter ID)
The
Evolution
allows the user to view up to 4 PIDs at one time. PIDs
identify an address in memory which contains vehicle operating information
a driver may wish to monitor. (See the
Set Up
section for a complete list)
Diagnostics
The
Evolution
is also a powerful diagnostics tool. You can view any
diagnostic trouble codes (DTCs) your vehicle may have, which in turn allows
you to fix them. It will also allow you to turn off that annoying “Check
Engine” light when the problem has been addressed (no more expensive trips
to the dealer for a diagnostics scan).
0-60 and Quarter Mile time
WARNING
Do not use the Performance Tests feature to break any
traffic laws. Perform these tests only where they are legal and safe.
Another feature often only found on the Edge Product monitors, is the ability
to determine your quarter mile times as well as your 0-60 times.
Alerts
If you would like to know when a certain parameter, such as transmission
temperature, reaches a desired value you can set an alert to that value. When
the preset value is reached, the
Evolution
’s screen will flash red and display
the triggered alert and the current value for that particular alert parameter.
Please note that Alerts may flash only if that parameter is being actively
displayed on the
Evolution
monitor.
Records
While driving, the
Evolution
will automatically record the highest values of
some parameters. These records can be viewed and reset at any time. Please
note that some parameters may record only if that parameter is actively
displayed on the
Evolution
monitor.
