EDGE30 / EDGE2440 / EDGE40 / EDGE2460 / EDGE60 / EDGE3860
Installation and Operating Manual
Original Instruction Manual
42
Rev 2.1 July 12, 2016
APPENDIX “A”
A1 Flat Rate Warranty Schedule
A1.1
Subject to the provisions of MF&B Warranty Policy and Procedure, the labor hours eligible for
reimbursement are limited to the following:
Diagnostic time:
Time is per incident and not cumulative. Tech. line
1-888-480-EDGE
1.0 Hours
Main Blower Motor:
.75 Hours
Main Blower Motor Capacitor:
.4 Hours
Flame Sensor:
.5 Hours
Gas Conversion:
1.0 Hours
Gas Valve:
.75 Hours
Induction Motor:
.4 Hours
Transformer:
.25 Hours
Ignition Control, Burner Control, Temp. Control or Speed Control:
.4 Hours
Switch or Fuse Holder:
.25 Hours
Conveyor Motor:
.75 Hours
Hall Effect Sensor:
.3 Hours
Control Box Cooling Fan:
.25 Hours
Thermocouple:
.4 Hours
Main Blower Relay:
.25 Hours
R & R Control Can:
.75 Hours
Set Gas Pressure:
.5 Hours
A2 Labor Rate
A2.1
Subject to the provisions of MF&B Warranty Policy and Procedure, the labor rate for reimbursement
is $60.00 per man hour. This labor rate is effective for all customers unless written consent and
acknowledgment has been given the MF&B Service Department.
A2.2
Maximum
allowance for troubleshooting labor is one (1) hour
.
A2.3
Travel time is not to be included in labor hours. Only time spent on site will be reimbursed.
