7
2. Remove the plastic battery insulator (if any) on the bottom of the remote control and
make sure the remote control has a battery installed. See “Installing and replacing
battery” section if you need a new battery.
3. Use the remote control to highlight and select the
Photo
folder (Use the direction keys
Right, Left
on the remote control to navigate and press
Enter
to select).
4. Highlight a picture and press
Enter
to view the picture.
5. Adjust the contrast of the screen using the
Contrast Dial
on the right side of the frame.
6. Press the
Brightness key
(13) to adjust the brightness setting.
7. Press the
Setup
button on the remote control to enter the
Setup Menu
.
8. Move to
Slideshow Setup
by pressing the
Down
button. Press
Enter
to continue.
9.
Use the
Down
key to select the
Interval Time
.
Use the
Right
direction key to enter the
time sections. Move up and down to select the desired transition time of a picture and
press
Enter
to select. Press the
Setup
button to exit the Setup menu.
Note: The
Interval Time
functions only when the
Slide Show Mode
is set to
Auto
.
10. To disable the slideshow function, select
Setup
,
Slideshow Setup
,
Slideshow Mode
and
Manual
. You will be able to change the displayed picture by pressing
Next
(15) or
Previous
(16) key.
See “Advance Settings” section for more control settings.
Caution
If you connect the Digital Picture Frame to a European-standard TV, please switch
the Digital Picture Frame to
PAL
mode by pressing
MENU
(7)
and
then
NTSC/PAL
key (19) on the remote control.
Note:
1. The original display mode setting of the Digital Picture Frame is NTSC.
2. When viewing a picture on the Digital Picture Frame with PAL mode, the
display of the Digital Picture Frame will be come vague.
**The NTSC mode applies to North America. The PAL mode applies to all countries in
Europe . **
Содержание DIGITAL PICTURE FRAME
Страница 10: ...9...
