AC input
Power Switch
page6
RCA Input Jacks
in gold
Speaker
connector
Input and speaker connector number based on
number of channels ordered.
Pictured is a 7channel setup.
Pictured with both RCA and Balanced connectors. The
units will be shipped with one or the other depending on
the way it is ordered.
Balanced Input
Jacks in black
Always make sure the power switches of your preamplifier, ampli-
fier, and source units are OFF and power indicator light is OFF
before making or disconnecting ANY connections. Never plug in
this unit and any components until all connections are completed.
Step 1
Speaker cables:
There are several options for terminating speaker
cables. We recommend ring terminals because
they minimize the possibility of a short circuit.
Discuss with your dealer which cables and termi -
nation configuration will work best with your
system. Attach your speaker cables to the back
of your amplifier. Be careful not to over tighten
the binding posts. They can be tightened by hand
and usually don’t require special tools.
Step 2
RCA or Balanced Interconnects:
Connect your RCA or Balanced interconnect
cables from your preamplifier outputs to the
corresponding left/right RCA or Balanced inputs
on your amplifier.
Step 3
AC Power Cord:
Connect your AC cord to the back of the
preamplifier and plug it into a grounded,
surge-protected outlet.
Some EDGE amplifiers are capable of drawing high amounts of
current. Depending on your loudspeakers and listening prefer-
ences, your AC outlet may not support the demands of your
amplifier, limiting your systems performance. A dedicated high-
current AC line may be of great benefit.
Step 4
Connect the rest of your components according to
the manufactures recommendations
Warning! Never unplug the interconnect cables while
your unit is on or immediately after shut off. This could
cause damage to your amplifier.
Setup & Cable Connections
page5
!
