5
T A B L E O F C O N T E N T S
I n s t a l l a t i o n I n s t r u c t i o n s
E A S
5
I N S T A L L A T I O N I N S T R U C T I O N S
B A C K - U P C A M E R A
JUNCTION
CABLE
This connection will reside In-
Cab and under the dash, so 3M
SEALANT TAPE is not needed.
J
C
FIGURE 8
2. Route the GROUND con-
nector to any grounded connec-
tion and fasten in place using
existing hardware.
FIGURE 9 - GROUND
3. Route the POWER connec-
tion to your fuse box. (Your
fuse box may be under the hood
of your vehicle)
4. In your fuse box, locate a 10
amp fuse that is powered only
when your key is turned on.
This information can be found
in your vehicle’s user manual.
(CAUTION: Do not connect to
a Fuse location that has con-
stantly supplied power.)
5. Remove the fuse, turn your
key on, and determine which
side of the fuse location is sup-
plied with power (known as the
“Hot” side). A voltage meter or
test light may be used.
6. Turn the key off. Retest the
fuse location to make sure the
power was shut off when you
turned your key off.
7. Locate the proper 10 amp
FUSE ADAPTER provided in
your kit. The leg with the wire
soldered to it needs to be placed
on the “HOT” side of the fuse
location (determined in step 6).
FIGURE 10
8. Plug the POWER connector
into the FUSE ADAPTER con-
nector.
POWER
GROUND
EXISTING
HARDWARE
GROUND
CONNECTION
KEYED POWER
(HOT SIDE IN FUSE BOX)
WIRE
LEAD
