Edge-Core VP3302, Руководство пользователя

Страница: 20 / 45

VP3302 IP Phone User Manual
3 d
The VP3302 series IP Phone installation design is very friendly. Almost all the
configurations can be done through the keypads and LCD screen display on the
phone set in a few minutes. In order to make a VoIP call, please do the
configurations through the keypads as described in the following few sections.
Note:
(1). When inputting an English character in any menu item, please press that
key button quickly to switch between the different characters until the
correct one is found.
(2). When the input mode is in digit mode ( inputs are ‘0’~’9’ and ‘*’,’#’), if an
English character is needed, please press the “TXT
←→
NUM” key first
to toggle to “character” input mode.
3.1 Network Configuration
W
the I
Phon
mod
3.1.1 Dynamic IP Method (DHCP)
M
under device/router device). Under this environment, the
easiest way to connect to the internet is using the DHCP method. The IP Phone
when configured using this method will get the IP parameters dynamically, and
conne
C ► (Yes/No) Dynamic IP
Configuration from The Keypa
hen using the VP3302 IP Phone, first set the network configuration to let
P Phone connect to the internet. , The proper method to configure the IP
e to connect to Internet depends on the network environment and phone
el.
ost of the network environments at the office, a hotel room or home are
a NAT (IP sharing
ct to the internet automatically.
onfigure ► Password
：
135 ► Network
Please press the “OK” key to set Yes on “(Yes / No) Dynamic IP” when
using DHCP method.
Most cable modem connections also use the DHCP method.
3.1.2 PPPoE Method
www.edge-core.com 18