Edge-Core VG007, Руководство по управлению

Страница: 49 / 86

5-1
Chapter 5: Access Point Mode
Operating in Access Point mode, the Pocket VoIP Gateway provides 802.11b/g
connectivity for wireless clients, with robust security options available and QoS
support for voice or video traffic.
In Access Point mode, the WAN and LAN ports act like two normal Ethernet switch
ports. There are no firewall or NAT features for traffic passing between the WAN and
LAN ports or wireless clients. There is also no DHCP server to assign IP addresses
to connected clients. A configured DHCP server must exist on the connected local
network to provide IP addresses to clients.
To access the web management interface in Access Point mode, connect directly to
the unit and used the default IP address, 192.168.7.1. Alternatively, if you want to
set an IP address that is compatible with the local network, use Gateway mode to
configure a fixed IP address first, then change back to Access Point mode.
Figure 5-1. Access Point Mode Settings
Access Point mode configuration parameters are described in the relevant chapter
of this guide. See the page references below to locate feature information.
Table 5-1. Access Point Configuration Options
Menu Description Page
Status Displays current system information 9-1
System Configures basic administrative and client access 6-1
Wireless Configures wireless connectivity 7-1
Setting Configures the ESSID and other radio parameters 7-1
Security Configures wireless encryption and authentication 7-4
Wireless QoS Controls QoS for traffic prioritization 7-7