background image

Wireless Settings

7-4

7

try setting the fragment size to send smaller fragments. This will speed up the 
retransmission of smaller frames. However, it is more efficient to set the fragment 
size larger if very little or no interference is present because it requires overhead 
to send multiple frames. (Range: 256-2346 bytes; Default: 2346 bytes)

Wireless Security

The Pocket VoIP Gateway’s wireless interface is configured by default as an “open 
system,” which broadcasts a beacon signal including the configured SSID. Wireless 
clients with a configured SSID of “ANY” can read the SSID from the beacon, and 
automatically set their SSID to allow immediate connection to the wireless network. 

To improve wireless network security, you have to implement two main functions:

• Authentication – It must be verified that clients attempting to connect to the network 

are authorized users.

• Traffic Encryption – Data passing between the unit and clients must be protected 

from interception and evesdropping.

For a more secure network, the access point can implement one or a combination of 
the following security mechanisms:

• Wired Equivalent Privacy (WEP) 

• IEEE 802.1X 

• Wi-Fi Protected Access (WPA) or WPA2

The security mechanisms that may be employed depend on the level of security 
required, the network and management resources available, and the software 
support provided on wireless clients. 

Содержание VG007























































































Отзывы: