Edge-Core VES3302-36, Быстрое руководство по установке

Страница: 13 / 33

11
4.
Configure Server Function
The parameter of Registrar Server and Proxy Server (figure shown below and next
page) is pre-configured. For general application, you only need to input correct
Public Address Settings in Sub-step 5 and click Apply , and then you can go
through to next Chapter
If you need to configure different parameter of Server for advanced application
purpose, or the setting is reset for some purpose, you can configure it by yourself
according to figure below and next page, also the
Appendix C and the User Manual
in attached CD.
Steps to check or configure Registrar Server:
1. Click path on left column: HOME / Advanced-SIP / Registrar
2.
Check or configure each parameter according to sub-steps on the figure
below.
Sub-step 1:
Select Enable
Sub-step 2:
Select ON
Sub-step 3:
Click Apply