Edge-Core ES3510MA, Руководство по управлению

Страница: 577 / 984

C
HAPTER
23
| Remote Monitoring Commands
– 577 –
such event will not be generated until the sampled value has risen
above the falling threshold, reaches the rising threshold, and again
moves back down to the failing threshold.
E
XAMPLE
Console(config)#rmon alarm 1 1 1.3.6.1.2.1.16.1.1.1.6.1 interval 15 delta
rising-threshold 100 event 1 falling-threshold 30 event 1 owner mike
Console(config)#
rmon event
This command creates a response event for an alarm. Use the no form to
remove an event.
S
YNTAX
rmon event index [ log ] | [ trap community ] | [ description string ] |
[ owner name ]
no rmon event index
index – Index to this entry. (Range: 1-65535)
log – Generates an RMON log entry when the event is triggered.
Log messages are processed based on the current configuration
settings for event logging (see "Event Logging" on page 529 ).
trap – Sends a trap message to all configured trap managers (see
"snmp-server host" on page 560 ).
community – A password-like community string sent with the trap
operation to SNMP v1 and v2c hosts. Although this string can be set
using the rmon event command by itself, it is recommended that
the string be defined using the snmp-server community command
( page 557 ) prior to using the rmon event command. (Range: 1-32
characters)
string – A comment that describes this event. (Range: 1-127
characters)
name – Name of the person who created this entry. (Range: 1-127
characters)
D
EFAULT
S
ETTING
One default event is configured as follows:
event Index = 1
Description: RMON_TRAP_LOG
Event type: log & trap
Event community name is public
Owner is RMON_SNMP
C
OMMAND
M
ODE
Global Configuration