Quick Installation Guide
ECWO5210-L Outdoor Access Point
ENGLISH
16
Step 4. Configure WDS (Wireless Distribution System) Settings (Optional)
To extend the wireless coverage, ECWO5210-L supports up to 8 WDS links for connecting wirelessly to other
WDS-capable APs (peer APs). By default, all WDS profiles are disabled.
Click on the
Wireless
main menu button.
Select the
Repeater
tab.
Choose
WDS
as the
Repeater Type
.
Choose the desired WDS profile:
(a) Enable the
WDS
.
(b) Enter the
Remote AP MAC Address
(peer AP) and then Click
SAVE
.
If you use another ECWO5210-L as the peer AP, simply repeat the above-mentioned steps to configure
another peer AP(s).
Note:
On each and every configuration page, you may click
SAVE
to save the changes of your configured
settings, but you must reboot the system for the changes to take effect. After clicking
SAVE
, the
following message will appear:
“Some modifications have been saved and will take effect after
APPLY.
”
