manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 389 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 389

Chapter 11

  |  Interface Commands

Interface Configuration

–  389  –

Command Usage 

◆

10GBASE-SFP+ connections are fixed at 10G, full duplex. When auto-
negotiation is enabled, the only attribute which can be advertised is flow 
control.

◆

The 1000BASE-T standard does not support forced mode. Auto-negotiation 
should always be used to establish a connection over any 1000BASE-T port or 
trunk.

◆

10GBASE-SFP+ connections are fixed at 10G - full duplex. Auto-negotiation 
must be disabled before you can configure or force an RJ-45 interface to use 
the Flow Control option.

◆

When auto-negotiation is enabled with the 

negotiation

 command

9

, the switch 

will negotiate the best settings for a link based on the 

capabilities

 command. 

When auto-negotiation is disabled, you must manually specify the link 
attributes with the 

speed-duplex

 and 

flowcontrol

 commands.

Example 

The following example configures Ethernet port 5 capabilities to include 100half 
and 100full.

Console(config)#interface ethernet 1/5

Console(config-if)#capabilities 100half

Console(config-if)#capabilities 100full 

Console(config-if)#capabilities flowcontrol

Console(config-if)#

Related Commands 

negotiation (393)
speed-duplex (395)flowcontrol (391)

description

This command adds a description to an interface. Use the 

no

 form to remove the 

description.

Syntax 

description

 

string

no description

string

 - Comment or a description to help you remember what is attached 

to this interface. (Range: 1-64 characters)

Default Setting 

None

9.

Support for auto-negotiation depends on transceiver type, such as 1G SFP.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов