manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 391 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 391

Chapter 11

  |  Interface Commands

Interface Configuration

–  391  –

flowcontrol

This command enables flow control. Use the 

no

 form to disable flow control.

Syntax 

[

no

] 

flowcontrol

Default Setting 

Disabled

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Command Usage 

◆

1000BASE-T does not support forced mode. Auto-negotiation should always be 
used to establish a connection over any 1000BASE-T port or trunk.

◆

10GBASE-SFP+ transceivers do not support auto-negotiation. Forced mode 
should always be used to establish a connection over any 10GBASE-SFP+ port 
or trunk.

◆

Flow control can eliminate frame loss by “blocking” traffic from end stations or 
segments connected directly to the switch when its buffers fill. When enabled, 
back pressure is used for half-duplex operation and IEEE 802.3-2002 (formally 
IEEE 802.3x) for full-duplex operation. 

◆

To force flow control on or off (with the 

flowcontrol

 or 

no flowcontrol

 

command), use the 

no negotiation

 command to disable auto-negotiation on 

the selected interface. 

◆

When using the 

negotiation

 command to enable auto-negotiation, the optimal 

settings will be determined by the 

capabilities

 command. To enable flow 

control under auto-negotiation, “flowcontrol” must be included in the 
capabilities list for any port

Example

The following example enables flow control on port 5.

Console(config)#interface ethernet 1/5

Console(config-if)#flowcontrol

Console(config-if)#no negotiation 

Console(config-if)#

Related Commands 

negotiation (393)
capabilities

 (flowcontrol, symmetric) (

388

)

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов