manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 324 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 324

Chapter 9

  |  General Security Measures

DHCPv6 Snooping

–  324  –

Example

This example enables DHCPv6 snooping globally for the switch.

Console(config)#ipv6 dhcp snooping

Console(config)#

Related Commands 

ipv6 dhcp snooping vlan (326)
ipv6 dhcp snooping trust (327)

ipv6 dhcp snooping

option remote-id

This command enables the insertion of remote-id option 37 information into 
DHCPv6 client messages. Remote-id option information such as the port attached 
to the client, DUID, and VLAN ID is used by the DHCPv6 server to assign 
preassigned configuration data specific to the DHCPv6 client. Use the 

no

 form of 

the command to disable this function.

Syntax 

[

no

]

 ipv6 dhcp snooping option remote-id

Default Setting 

Disabled

Command Mode

Global Configuration

Command Usage

◆

DHCPv6 provides a relay mechanism for sending information about the switch 
and its DHCPv6 clients to the DHCPv6 server. Known as DHCPv6 Option 37, it 
allows compatible DHCPv6 servers to use the information when assigning IP 
addresses, or to set other services or policies for clients.

◆

When DHCPv6 Snooping Information Option 37 is enabled, the requesting 
client (or an intermediate relay agent that has used the information fields to 
describe itself ) can be identified in the DHCPv6 request packets forwarded by 
the switch and in reply packets sent back from the DHCPv6 server.

◆

When the DHCPv6 Snooping Option 37 is enabled, clients can be identified by 
the switch port to which they are connected rather than just their MAC address. 
DHCPv6 client-server exchange messages are then forwarded directly between 
the server and client without having to flood them to the entire VLAN.

◆

DHCPv6 snooping must be enabled for the DHCPv6 Option 37 information to 
be inserted into packets. When enabled, the switch will either drop, keep or 
remove option 37 information in incoming DHCPv6 packets. Packets are 
processed as follows:

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов