Edge-Core ECS4110-28T, Руководство по управлению, Страница: 827 / 1514

C
HAPTER
24
| Authentication Commands
User Accounts and Privilege Levels
– 827 –
privilege
This command assigns a privilege level to specified command groups or
individual commands. Use the no form to restore the default setting.
S
YNTAX
privilege mode [ all ] level level command
no privilege mode [ all ] command
mode - The configuration mode containing the specified command .
(See "Understanding Command Modes" on page 702 and
"Configuration Commands" on page 703 .)
all - Modifies the privilege level for all subcommands under the
specified command .
level level - Specifies the privilege level for the specified command .
Refer to the default settings described for the access level
parameter under the username command. (Range: 0-15)
command - Specifies any command contained within the specified
mode .
D
EFAULT
S
ETTING
Privilege level 0 provides access to a limited number of the commands
which display the current status of the switch, as well as several database
clear and reset functions. Level 8 provides access to all display status and
configuration commands, except for those controlling various
authentication and security features. Level 15 provides full access to all
commands.
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
This example sets the privilege level for the ping command to Privileged
Exec.
Console(config)#privilege exec level 15 ping
Console(config)#
show privilege
This command shows the privilege level for the current user, or the
privilege level for commands modified by the privilege command.
S
YNTAX
show privilege [ command ]
command - Displays the privilege level for all commands modified
by the privilege command.
C
OMMAND
M
ODE
Privileged Exec