Quick Installation Guide
ECH502
ENGLISH
⑮
< Verify Setup with User Login >
Follow the steps below to verify the basic configurations completed in the
Quick Start
section:
Step 1:
Associate a laptop PC or a smartphone to "SSID 1" wirelessly. The device will obtain an IP address
automatically within the SZ1 of the ECH502.
Step 2:
Launch a web browser and enter any HTTP website URL. The default
User Login Page
will appear.
Step 3:
Enter the
Username
and
Password
of a local user account previously created (e.g. Username
:
testuser
and Password
: testuser
); then Click
Login
.
Step 4:
The Login Success Page appears after the user is successfully authenticated by the system.
Well Done!
The ECH502 is now up and running with the basic configurations.
Note:
1.
The ECH502 supports multiple authentication server options including built-in local user database and
external authentication servers.
2.
The complete username format is
userid@postfix
, where the “postfix” string stands for the back-end
authentication server. Therefore, match-up between username and back-end authentication server is based
on the "postfix" string in the complete username.
3.
Normally, users have to enter the complete username (e.g.
testuser@local
) during login. However, the
postfix can be omitted when the postfix matches the default authentication server option. For example,
LOCAL database is enabled as the default authentication option; therefore, in this case, you can simply enter
testuser
as the username to log in.
P/N: V10020180504