Edge-Core EAP2316A, Руководство по установке

Страница: 18 / 38

Hardware Installation
2-2
Mounting on a wall – The access point should be mounted only to a wall or
wood surface that is at least 1/2-inch plywood or its equivalent. Mark the
position of the mounting screws on the wall so they line up with the two
mounting slots on the bottom of the access point. Set the 5/8-inch number 12
wood screws into the wall, leaving about 3 mm (0.12 in.) clearance from the
wall. And then slide the access point down onto the screws.
Mounting on a suspended ceiling – To mount the access point to a suspended
ceiling, do the following:
• Choose a location on the ceiling where the access point will be installed on the
suspended ceiling T-rail.
• Align the mounting track and fastening clip with the T-rail and slide sideways
so that the T-rail engages with the second mounting track. The access point
will snap into place.
Wall Mounting Slots
Bottom of Access Point
Fastening Clip
T-rail Mounting Tracks