– 1 –
S a f e t y & Re g u l a t o r y I n f o r m a t i o n
FCC Class B
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
■
Reorient or relocate the receiving antenna
■
Increase the separation between the equipment and receiver
■
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
■
Consult the dealer or an experienced radio/TV technician for
help
This equipment has been verified to comply with the limits for a
Class B computing device, pursuant to FCC Rules. In order to
maintain compliance with FCC regulations, shielded cables must be
used with this equipment. Operation with non-approved equipment
or unshielded cables is likely to result in interference to radio and TV
reception. The user is cautioned that changes and modifications
made to the equipment without the approval of manufacturer could
void the user's authority to operate this equipment.
CE Mark
CE Mark Declaration of Conformance for EMI and Safety (EEC)
This information technology equipment complies with the
requirements of the Council Directive 2014/30/EU on the
Approximation of the laws of the Member States relating to
Electromagnetic Compatibility and 2014/35/EU for electrical
equipment used within certain voltage limits. For the evaluation of the
compliance with these Directives, the following standards were
applied:
RFI Emission:
■
Limit according to EN 55032:2015/A1:2020, Class B
■
Limit for harmonic current emission according to EN
61000-3-2:2019/A1:2021, Class A
■
Limitation of voltage fluctuation and flicker in low-voltage
supply systems according to EN 61000-3-3:2013
+A1:2019
Immunity:
■
Product family standard according to EN 55024:2010+
A1:2015
■
Product family standard according to EN 55035:2017
■
Electrostatic Discharge according to IEC 61000-4-2:2008
ED. 2.0
■
Radio-frequency electromagnetic field according to
IEC 61000-4-3 ED. 4.0:2020
■
Electrical fast transient/burst according to IEC 61000-4-
4:2012 ED. 3.0
■
Surge immunity test according to IEC 61000-4-5:2017 ED.
3.1
■
Immunity to conducted disturbances, Induced by radio-
frequency fields: IEC 61000-4-6:2013 ED. 4.0
■
Power frequency magnetic field immunity test according to
IEC 61000-4-8:2009 ED. 2.0
■
Voltage dips, short interruptions and voltage variations
immunity test according to IEC 61000-4-11 ED. 3.0:2020
LVD:
■
EN 62368-1:2014/A11:2017
The Declaration of Conformity (DoC) can be obtained from
www.edge-core.com -> support -> download.
Mayflex UK Ltd
Junction Six Industrial Park Electric Avenue
Birmingham B6 7JJ
United Kingdom
Vesper Technologies Limited
Unit 5/6 Rugby Park, Bletchley Road, Heaton Mersey
Stockport SK4 3EJ
United Kingdom
Laser Safety
Warning:
Fiber Optic Port Safety:
Avertissment:
Ports pour fibres optiques - sécurité sur le plan
optique
:
Warnhinweis:
Faseroptikanschlüsse - Optische Sicherheit:
警告：光纤端口安全
:
Power and Battery Safety
When using a fiber optic port, never look at the transmit
laser while it is powered on. Also, never look directly at
the fiber TX port and fiber cable ends when they are
powered on.
Ne regardez jamais le laser tant qu'il est sous tension.
Ne regardez jamais directement le port TX
(Transmission) à fibres optiques et les embouts de
câbles à fibres optiques tant qu'ils sont sous tension.
Niemals ein Übertragungslaser betrachten, während
dieses eingeschaltet ist. Niemals direkt auf den Faser-
TX-Anschluß und auf die Faserkabelenden schauen,
während diese eingeschaltet sind.
使用光纤端口时，切勿在其电源处于开启状态时注视发射
激光器。此外，切勿在光纤 TX 端口和光纤端头的电源处
于开启状态时直接注视它们。
Warning:
If your device uses a lithium battery, do not attempt
to replace the battery yourself. Return the device to the
manufacturer for battery replacement.
Avertissement:
Si votre appareil utilise une batterie au
lithium, n’essayez pas de la remplacer vous-même. Renvoyez
l’appareil au fabricant pour le remplacement de la batterie.
If the device contains lithium batteries that are encased in a
sealed chassis, do not attempt to open the sealed chassis under
any circumstances.
Si l’appareil contient des batteries au lithium enfermées dans
un châssis scellé, n’essayez en aucun cas d’ouvrir le châssis
scellé.
CLASS 1
LASER PRODUCT
PRODUIT LASER
DE CLASSE 1
LASERPRODUKT
DER KLASSE 1
㉏▔ܝ䆒
E032022-CS-R01
150200002481A
Cell Site Gateway
AS5915-18X | AS5915-18X AC
www.edge-core.com
*150200002481A_R01*