EdenPURE NatureWasher, Руководство пользователя

Страница: 12 / 20

8 11
OWNER’S MANUAL
Settings
Adjuster
Settings
Rubber Grip
Nozzle Connector
Nozzle Hose
Nozzle Hose
Cold Water Hose
Washer Hose
Hose Outlet Inlet
Pressure
Adjustment
Nozzle
Handle
Wall Mount
A/C Adaptor
be careful not to overtighten.
7. Slowly turn on your home’s cold water faucet. Make sure there is no leaking from any part of
the cold water hose.
8. Plug in the adapter to the Naturewasher™ and then plug into your outlet. Naturewasher™ is
now installed for operation. The Naturewasher™ is automatic and will turn on when water fl ows
through it. A blue light will appear in the window whenever water fl ows through it. Before running
your Naturewasher™, it is recommended to fi rst run an “empty load” cycle 2-3 times before
adding any laundry. This ensures that all detergent or soap build-up is removed.
NATUREWASHER™ SPRAY NOZZLE INSTALLATION
WHAT’S INCLUDED:
Naturewasher™ Spray Nozzle
Naturewasher™ Spray Nozzle Hose
Naturewasher™ Spray Nozzle Mounting Hook
Control “on/off” Valve
1. Attach the Control on/off Valve to the Naturewasher™ Unit. Be sure that the valve is set to the
“off” position. Hand tighten only, so not overtighten.
2. Attach the Naturewasher™ Spray Nozzle Hose to the Control on/off Valve and hand tighten as well.
3. Attach the Naturewasher™ Spray Nozzle to the end of the Naturewasher™ Spray Nozzle Hose
and hand tighten.
4. Using the included Mounting Screws and Washers, fasten the Naturewasher™ Spray Nozzle Hook”
near the Naturewasher™ Unit. Attach the 2 Decorative Screw Caps into screws and that’s it.
2 Mounting Screws
2 Washers
2 Wall Anchors
2 Decorative Screw Caps