5
OPERATING YOUR HEATER
Place the heater on a firm, level surface and plug into a 120V 60Hz power outlet. Once
the Electric Fireplace has been properly assembled and connected to an electrical
outlet, it is ready to operate.
1. Power switch
“
— O
”
The Power switch is located on the Rear cover.
Press the Power switch to turn the unit on.
2.
Heater switch
“
—
”
For heat function - Turn the Heater switch on while the
Power switch is on.
MAINTENANCE
1. Glass Information
* Under no circumstances should this product be operated with missing or broken glass.
* Do not strike the glass.
* Do not use abrasive cleaners to clean the glass.
* Replacement glass is available from the manufacturer and replacement should be
carried out by a qualified service person.
2. Cleaning
*
To clean the unit, first turn off controls on unit and unplug unit from power source.
*To clean the glass door: remove dust with clean dry cloth or to remove finger prints and
other marks clean glass with clean damp cloth. Do not use abrasive cleaners or spray
liquids on glass door surfaces.
*Metal and metal painted parts should be cleaned with clean damp cloth only. Do not
use abrasive cleaners or spray liquids on this surface.
TROUBLE SHOOTING
If the heater will not operate, please check the following before seeking repair or service:
1. Check if the power cord is plugged into an electrical outlet, if not, plug in.
2. Check if electricity to the outlet is working.
