3/7
LED Desescarche
LED Refrigerante
Preparation and power supply
:
Dedicated power socket
Normally, the power supply should be 220-240V single-phase with a dedicated single-phase socket (250V,
10A) and a fuse (6A). The power receptacle must have a reliable earth connection.
No share on socket
No Never let the refrigerator share the common socket with other appliance, otherwise the cable become
shot and fire might be resulted.
No water flushing
Never giver the refrigerator surface a flush otherwise current leakage might be resulted.
Protect cables
Never break or damage the cables otherwise current leakage andfire might be resulted.
Prevent from flammables and explosive
Never put any flammable or explosive inside the refrigerator such as ether, gasoline, alcohol, adhesive and
explosive. Never put dangerous product nearbythe refrigerator.
No spray
To spray the flammables such as paint or coating near by the refrigerator is not allowed, otherwise fire
might be resulted.
After power break
After power break or unplugging the refrigerator, always wait at least 5 minutes and then you may plug the
refrigerator and start it again.
No medicine
No medicine is allowed to keep inside the refrigerator.
Use and caution:
1. Befora use:
Plug the refrigerator on 220-240V~ exclusive socket. After the refrigerator running, put hand on the air
suction to confirm it is sufficient cold.Then you may put food inside the cold box.
2. Digitaltemperaturecontroller:
5’
