edenox TOUCH LINE 4, Инструкция по эксплуатации

Страница: 46 / 48

50
Chapter 7. Ordinary maintenance EN
7.1. Cleaning and maintenance
Before carrying out maintenance operations:
 Turn the appliance off by pressing .
 Press the main switch (1) located on the back of the appliance in the OFF position.
 Remove the plug from the mains socket.
 Wait for the machine to cool down.
 Clean the appliance after each use with a damp
and soft cloth.
 Clean the Plexiglas cover (6) inside and out using
only neutral detergents (water and soap).
MX 2
MX 4
Only for MX 2
For more thorough cleaning, it is possible to
disassemble the cover by removing the
locking plate (with the cover in the open
position).
Then put the cover back in place, fitting it in
the same way.
 Do not use abrasive products, alcohol-based
detergents, abrasive sponges, solvents or metal
objects.
 Follow the safety instructions indicated on the
packaging when using products to clean the steel
tank (4).
 Clean the tank (4), especially in the case of residue
liquid, it is advisable to remove the sealing bar (5)
upwards.
 Clean the sealing bar (5) with a dry cloth. Remove
any residue that deposits on the sealing bar (5).
 Clean the metal surfaces using normal detergents
suitable for stainless steel.
 Keep the display (3) clean and dry.
24/7
50
Chapter 7. Ordinary maintenance EN
7.1. Cleaning and maintenance
Before carrying out maintenance operations:
 Turn the appliance off by pressing .
 Press the main switch (1) located on the back of the appliance in the OFF position.
 Remove the plug from the mains socket.
 Wait for the machine to cool down.
 Clean the appliance after each use with a damp
and soft cloth.
 Clean the Plexiglas cover (6) inside and out using
only neutral detergents (water and soap).
MX 2
MX 4
Only for MX 2
For more thorough cleaning, it is possible to
disassemble the cover by removing the
locking plate (with the cover in the open
position).
Then put the cover back in place, fitting it in
the same way.
 Do not use abrasive products, alcohol-based
detergents, abrasive sponges, solvents or metal
objects.
 Follow the safety instructions indicated on the
packaging when using products to clean the steel
tank (4).
 Clean the tank (4), especially in the case of residue
liquid, it is advisable to remove the sealing bar (5)
upwards.
 Clean the sealing bar (5) with a dry cloth. Remove
any residue that deposits on the sealing bar (5).
 Clean the metal surfaces using normal detergents
suitable for stainless steel.
 Keep the display (3) clean and dry.