background image

 

operating all the pilot lights will stay on, but the audio output to the 
speaker will be shut down until the unit reaches a safe operating 
temperature. The D.I. will continue to operate during the thermal 
standby. Your unit will come back on automatically in 1 to 5 minuets and 
operate normally.  
 
HEAT SINK (chassis) 
 
Your Nemesis unit is designed so that the outside panel (chassis) is also 
the heat sink for the entire unit.  
PLEASE EXPECT THIS UNIT TO RUN HOT TO THE TOUCH.  
This means that the panel will always be from warm to quite HOT to the 
human touch after playing for a while. This is normal and is totally within 
the design parameters for the type of output devices that are used in this 
unit. The thermal safety system will shut down the Audio Amplifier output 
if the internal temperature rises above 190 degrees F.  
 
HEAVY DUTY PROFESSIONAL USE 
 
The Nemesis Combos are primarily designed for small clubs and 
medium venues. The Nemesis Combos run well above normal combo 
loudness levels. However,it is not designed to replace or to perform as 
loudly as the more powerful Eden separate systems. If you find that you 
are pushing your amplifier so hard that you are encountering thermal 
standby and shut down on more than a very occasional basis. You are 
pushing the unit well above the intended operating parameters.  
 
Your Nemesis (A) version is fitted with an additional external heat sink to 
improve cooling at very high power levels and extreme playing 
situations. With this extra cooling configuration and the automatic 
internal audio limiters you can play your Nemesis combo at 
unreasonable levels almost indefinitely. 
 
 
 
 
 
EXTERNAL SPEAKER OUTPUT 
 
This jack allows you to use an external extention cabinet. The jack is 

Содержание NEMESIS NC-200A









Отзывы: