6
Master Level Control
This control is directly ahead of the output power amplifier. It controls
the main stage sound level and the Head Phone outputs.
Head Phones
The Head Phone jack is provided for practicing and can be used as an
additional signal send or slave output as it follows the Master Control.
Light Switch and Internal Lighting
This lighted switch turns the internal light on and off. The internal
lighting on your unit is designed to ( PULSE and DIM ) just as the
amplifier reaches full power. These lights respond in the same way as
the old vacuum tube systems did when they sucked all the available
power out of power supplies at high playing levels.
Mains AC Power Switch
This turns your unit on and off. Due to the international voltage selector
that your unit is equipped with the AC Mains power switching is placed
ahead of the fuse. It is possible for the fuse to be blown and the indicator
light to be on. It is set up that way to meet certain European Safety
regulations. Always be certain the unit is properly set up for the correct
voltage of the country it is being used in. If you have any questions
about this call either the factory or an authorized service center and find
out before you attempt to use your unit. If you need to change operating
voltages for international travel call ahead and make certain that you
know the voltage and line cord required by the country you will be going
to. Always have a qualified technician do the voltage changes.
