©2002 Edelbrock Corporation
Rev. 9/02
Brochure No. 63-0142
Catalog #71001
Page 2 of 21
Caution!!
Before You Install Your Edelbrock Nitrous System…
Please read this installation manual fully before installing this system.
You will need to have available the following tools:
Hand Tools
❑
Socket set including ratchets and extensions
❑
Screwdrivers
❑
Pliers
❑
Bench vise
❑
Wire crimping pliers, wire strippers
❑
Floor jack
❑
Razor blade or other sharp, flat edged cutting instrument
❑
Vehicle jackstands
❑
Safety glasses
Power Tools
❑
Power drill
❑
Drill bits (1/4”, 7/16”, 1/2” and 3/8”)
You should understand the following skills:
❑
Power tool safety procedures
❑
Undercar safety procedures
❑
Proper measuring techniques
❑
Proper electrical assembly techniques
❑
Basic engine operation and tuning
Anytime you have questions or concerns with your Edelbrock Nitrous System, please call our technical
support hotline at
1-800-416-8628
before you start your engine.
℡
