Page 3 of 22
Catalog #70403
Brochure No. 63-0147
©2003 Edelbrock Corporation
Rev. 1/03
Caution!!
Before You Install Your Edelbrock Nitrous System…
Please read this Installation manual fully before installing this system.
You will need to have available the following tools:
Hand Tools
❑
Socket set including ratchets and extensions
❑
Screwdrivers
❑
Pliers
❑
Bench vise
❑
Wire crimping pliers, wire strippers
❑
Floor jack
❑
Vehicle jackstands
❑
Safety glasses
Power Tools
❑
Power drill
❑
Drill bits (1/4”, 1/2” and 3/8”)
You should understand the following skills:
❑
Power tool safety procedures
❑
Undercar safety procedures
❑
Proper measuring techniques
❑
Proper electrical assembly techniques
❑
Basic engine operation and tuning
Anytime you have questions or concerns with your Edelbrock Nitrous System, please call our
Technical Support Hotline at 1-800-416-8628
before you start your engine.
℡
