background image

Pro-Flo Header 

1994-1997 Honda Civic Del Sol 

Catalog PNs 6642, 6742, 4742 

Please study these instructions carefully before installing your new Pro-Flo Header.   

They provide general guidelines to be studied and understood before you remove your stock 

system.  Failure to follow these instructions may void your warranty.  If you have any questions or 

problems, please contact our 

Technical Hotline at : 1-800-416-8628 

from 7 am – 5 pm, 

Monday through Friday, Pacific Standard Time. 

 

 

DESCRIPTION:  

Edelbrock Pro-Flo header components are designed to improve the exhaust 

efficiency of the Civic del Sol 1.6L (B16A) engine.  A performance gain can be expected with the 

installation of the system.  This system requires no welding for installation and retains all stock 

emissions equipment.   

 

Suggested tools needed for installation:  

This vehicle has some metric fasteners. 

 

3/8” ratchet socket set with extensions and a good assortment of metric sockets 

Combination wrenches (metric) 

Universal 12mm and 14mm swivel sockets 

Jackstands, screwdrivers, pliers, crescent wrench, etc. 

Liquid penetrant (GM #1052627 or equivalent); anti-seize compound (GM #5613695 or 

equivalent) 

 

 

SPECIAL NOTICE:  

This Edelbrock part has received an Executive Order number (E.O. #) from 

the California Air Resources Board (C.A.R.B.) making it legal for street use on pollution-controlled 

motor vehicles in all 50 states.  To assist you with emissions equipment certification, we have 

included a silver fan shroud decal to help testing personnel verify that this part is a legal 

replacement part on the vehicle for which it is cataloged.  The adhesive-backed decal should be 

affixed to your fan shroud next to the existing emission and engine specification decal.  Do not 

cover your original equipment specification decal with the Edelbrock fan shroud decal. 

 

WARNING:  

The use of “Thermal Wrap” or any aftermarket coating process will void the 

warranty on your Pro-Flo header.  Those products can cause excessive heat and moisture build up 

resulting in corrosion and early failure of the system. 

DISASSEMBLY:

 

1. Disconnect battery negative cable from battery. 

2. Raise vehicle and support with jackstand. 

3. The use of penetrating oil when removing and the use of anti-seize compound when 

installing nuts and bolts will prevent the possibility of broken or stripped nuts and bolts. 

4. Make sure converter is cool. 

Отзывы: