The seat sides and centre come pre assem-
bled, (A) you will need to secure the 4 seat
lats at equal distances (the 2 front lats are
pre cut to fit around the arm rests) secure
each end and in the middle with 2 x 80mm
screws per lat.
(B)
Then arrange the 3 remaining lats on the
back rest with a 75mm gap at the top and
100mm gap at the bottom, again using 2 x
80mm screws either end and in the middle
(C)
Once your lats are secured in place turn
the bench over and affix the 2 chamfered
pre drilled lats to the bottom of the seat
with 2 x 80mm screws into both ends and
middle support.
(D)
Finally screw in the 4 eye hooks ready for
the chain.
BUILDING AND INSTALLING THE SEAT
Step 6
Don’t forget to check your work with a level as you go!
Page 7 of 9
www.eDecks.co.uk
All images are for illustration only, Please see individual item listings for actual item specifications
Garden Swing Fitting Instructions
A
C
D
B
100mm Gap
75mm Gap
