Caution! There are no user serviceable parts inside the unit. Do
not open the housing or attempt any repairs yourself.
Please read these instructions carefully.They include
important information about the installation,usage and
maintenance of this product.
Please keep this User Guide for future use. If you sell the unit to someone else, be sure that they also
receive this User Guide.
ALWAYS
make sure that you are connecting to the proper voltage, and that the line voltage you are
connecting to is not higher than that stated on the decal or rear panel of the ficture.
To prevent risk of fire or shock, do not expose fixture to rain or moisture.
Make sure there are no flammable materials close to the unit while operating.
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent
surfaces. Be sure that no ventilation slots are blocked.
ALWAYS
disconnect from the power source before servicing or replacing fuse and be sure to replace
with same fuse size and type.
ALWAYS
secure fixture using a safety chain.
NEVER
carry the fixture by its cord. Use its carrying
handles.
DO NOT
operate at ambient temperatures higher than 104°F (40°C).
In the event of a serious operating problem, stop using the unit immediately.
NEVER
try to repair the
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center. Always use the same type spare parts.
NEVER
connect the device to a dimmer pack
Make sure the power cord is never crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Avoid direct eye exposure to the light source while it is on.
SAFETY INSTRUCTIONS
