Eddyfi Technologies GEKKO M2M, Техническая документация инструкция

Страница: 26 / 31

26
13. CLEANING
External surfaces of GEKKO, that is to say the housing, protector of the LCD screen can be cleaned when necessary. Make sure the unit is closed,
power cord disconnected, and batteries removed.
Disconnect all cables and connectors and check that the rubber protectors are closed on all external GEKKO ports. Make sure that the battery
compartment cover is securely closed. To restore the original appearance of the unit, clean the housing with a soft cloth. To remove stubborn stains,
use a damp cloth with a mild soap solution. Do not use abrasives or strong solvents which could damage the finish. Once you have removed the
connector protection, make sure they are dry before connecting anything else. If the connectors are wet, dry them with a soft dry cloth or let them air
dry.
Never use abrasives or strong solvents to clean the GEKKO screen. Clean with a damp cloth and washer fluid. If you have no washer fluid, use a
standard glass cleaner. If appropriate, use a soft brush to remove paper towel waste.