~
* When tool is used outdoors,
employ only extension
cords intended for use
outdoors and so marked "W-A".
* When working on small or irregular shaped objects secure work in a vise or
clamps.
* Disconnect
the tool when not in use. Avoid unintentional
starting.
If the
gun stops during operating, disconnect from the power supply and have gun
serviced by authorized service personnel.
* Stay alert! always pay attention
to the work at hand and use common
sense when operating this and all tools. Do not operate the tool when you
are tired or taking medication or drugs that may make you drowsy.
WHEN
REMOVING
PAINT
OR VARNISH
* Never use the heat gun in combination
with chemical strippers.
* Clean dry paint or varnish from the nozzle and scrapers after use. It could
ignite.
* Use in well-ventilated areas only. Peelings and residue from lead-based paints
are poisonouse.
POWER
INFORMATION
Be sure the power supply you are using agrees with the nameplate marking
on the VT-1100 heat gun the guns are designed to run on 120 volt. GO-cycle.
alternating
current
(ordinary
house current).
Voltage decreases greater than
10% can Cause loss of power and possible overheating.
The tool is double
insulated for added safety. This means there are two
separate
layers of insulation
between
the operator
and the tool's electrical
system. Warning: double insulation
does not take the place of normal safety
precautions
when operating the VT-1100 heat gun. double insu lation acts as a
safeguard against injury resulting from a possible electrical
insulation failure
inside the tool.
4
Содержание VT-1100
Страница 1: ......
