Check if all wirings have been connected correctly and then connect the unit to
connector for microphone is set in the PCB. If you need to link with an extra microphone for wiretapping
stallation Guide:
the motor power.
A
purpose, contact us to add this optional function before we deliver the devices to you.
In
Descriptions of PINs
Pin
Color
Function
1
Red
DC In. Input voltage: 9V~35V. 12V suggested.
2
Black
GND
3
White
Digital
Inputs
4
Yellow
Outputs
( if be drove by CMD, output pin will be connect
to GND inside Tracker in order that the current
can flow in Tracker ) ------
5
Blue
ts.
10 Bits Resolution Analog Inpu
Input voltage: 0~6V.
ini USB Port
ker with computer by USB cable for configuration ,
e USB cable.
ote:
USB cable for configuration is optional
accessory, and need buy it separately )
M
Connect the trac
You need to install the driver -
PL-2303 Driver Installer
- for using th
Refer to <GPS Tracker Parameter Editor> for configuration .
(n
---------
- 6 -